Library status LED 7. The default is mailslot enabled. MSL series tape li HP technical support and phone numbers: We inspect and maintain your tape drives and libraries. Each tape drive in the library and the library controller is a separate SCSI target.
|Date Added:||10 May 2012|
|File Size:||26.20 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
HP StorageWorks MSL6000 Series Tape Library With 2 X SDLT 600 Drives
Load tapes into nsl6000 library. Tape drive 0 7. Library status LED 7. LTO Tape information Lto. Refer to the documentation for those kits.
BV onderdeel van Frontier Computer Corp.
HP MSL Series Tape Library – new, refurbished and spares
HP technical support and phone numbers: If a component is already installed immediately below the planned position of the new component, place the template against the front mounting rails and rest it on top of the previously installed component. Set the library’s IP address for Web access optional.
When the library is fully extended, ensure that the rack enclosure does not deries. Two-drive libraries require four retaining screws; four-drive libraries require two retaining screws. Please also look at LTO Roadmap.
There is a good chance we have the product in stock. Match up the hole pattern printed on the sides of the template with the hole pattern in the mounting rails. Fully tighten the front rail screws. Save the packing materials for use in moving and shipping the library in the future. Wij hebben altijd het belang gezien van data opslag op tape en dragen dat nog elke dag uit.
Accessory PCI slots 2 8. HP recommends that the robot and drive 0 be attached to host bus 0. Seies translation system by Faboba.
Configure your application software. We inspect and maintain your tape drives and libraries. If necessary, turn the library on by touching the GUI touch screen. Level the rear of the library and fully tighten the rear rail screws.
Repair We inspect and maintain your tape drives and libraries. Slide the inner bearing race 2 as far as possible to the front of the rail assembly. Documentation CD — User guide and Web links for product registration, drivers, and technical support.
Pass-through mechanism interface controller 4. For serirs performance, do not attach more than two drives per bus. Use the back of the template to mark the attachment points on the back of the rack enclosure for mounting brackets, rails, components, or cage nuts. Each tape drive in the library and the library controller is a separate SCSI target.
Inspect the contents of the kit: Select a location that is flat, sturdy, and level. GUI touch screen 6. Remove the template and attach the rails using the supplied fasteners.